MAGNETIC PERFORMANCE EVALUATION
HOT WATER BOILER APPLICATION

Initial Evaluation of Magnetic Performance

Note: Only used to evaluate the initial impact of energizers on the system, to insure of correct installation & to monitor the emissions.

• Adjustment of the boiler to the optimum efficiency (as recommended by manufacturer or boiler maintenance specialist);
  
• Monitoring stack temperature, O2 and CO2 levels, boiler efficiency and emissions before installation of the energizers;
  
• Installation of magnets on gas line, water return line and air line (optional);
  
• Monitoring stack temperature, O2 and CO2 levels, boiler efficiency and emissions after installation of the energizers;
  
• Comparison of the monitored data before & after installation.

Note: Any increase of stack temperature and CO2 level and decrease of O2 level & emissions shows the improvement.

Procedure of Periodic Evaluation

Note: Regular procedure to evaluate the impact of energizers on the system based on gas invoices and degree days figures reported by Environment Canada for the region.

• Adjustment of the boiler to the optimum efficiency (as recommended by manufacturer or boiler maintenance specialist);
  
• Installation of energizers on gas line, water return line and air line (optional);
  
• Re-adjustment of the boiler 4-6 weeks after installation (due to stabilisation period of energizers);
  
• Estimation of average monthly gas consumption based on monitored gas consumption (Gas invoices or gas meter readings) and reported Degree Days by Environment Canada for the region;
  
• Comparison of the data of the same period before & after installation.

Note: Any decrease of average gas consumption (M3/DD) shows the percentage of improvement.

Procedure of Precise Evaluation

Note: Precise procedure is used to study the impact of magnets on the system based on heat balance equations.

• Adjustment of the boiler to the optimum efficiency (as recommended by manufacturer or boiler maintenance specialist);
  
• Monitoring temperatures of water in & out, water flow rate and gas consumption before installation (every 5-10 minutes for minimum period of one week);
  
• Installation of energizers on gas line, water return line and air line (optional);
  
• Monitoring temperatures of water in & out, water flow rate and gas consumption after installation (every 5-10 minutes for minimum period of one week);
  
• Calculation of energy input, energy output & heating efficiency based on monitored data before & after installation;
  
• Comparison of the calculated data before & after installation.

Note: Any increase of heating efficiency shows the improvement.

If you have suggestions for additional links, please send us mail.